Auxilliary products

PRO-PRIME 901

Adhesion promoter for the PRO-SEAL series.

Used to improve adhesion on non-porous substrates.

  • check

    1 component

    Polyurethane based, humidity curing.

  • check

    Low-viscosity

    Highly penetrating primer.

  • check

    Non-yellowing

    aliphatic polyurethane.

  • check

    Use above and below the waterline

    Highly resistant to saltwater and chemicals.

PRO-PRIME 901 150ml

Further information:

PRO-PRIME 951

Primer for the PRO-DECK System.

2-component water-based epoxy primer / adhesion promoter for PRO-DECK 101.

  • check

    1:1 by volume

    Very easy to mix.

  • check

    Water-based

    A 0 V.O.C. product.

PRO-PRIME 951

Further information:

  • Packaging: 500 ml, 1 lt, 2 lt.

PU-COAT 101

1 component, clear PU topcoat.

Surface toughener for PRO-DECK 101.

PU-COAT 101

Further information:

  • Packaging: 150 ml.

PRO-CLEAN IPA

IPA based cleaner.

Cleaner for non-oily/greasy substrates.

PRO-CLEAN IPA

Further information:

  • Packaging: 1 lt.

PRO-CLEAN X

Xylene based cleaner.

Cleaner for removing oil, grease, glues, etc..

PRO-CLEAN X

Further information:

AUX 101

Thixotropic silica additive.

Hydrophobic fumed silica for PRO-EPOX 101, offering a high thickening effect.

AUX-101: Thixotropic silica additive.

Further information:

  • Packaging: 300 ml.

AUX 201

Reinforcing fiber additive.

  • Used in the PRO-FILL Series to increase compressive / tensile strength and ding resistance.
  • Used in PRO-EPOX 101, between layers of fiberglass, to enhance interlayer adhesion.

.

AUX-201: Reinforcing fiber additive.

Further information:

  • Packaging: 300 ml.
navic marine chemicals

27B1, Polidefkous St.
185 45 Piraeus
Greece.
GEMI No.: 161 797 907 000

Facebook Instagram Linkedin Youtube

Copyright 2023 © navic

Cookie Policy (EU)
Terms & Conditions